Flow Meter, 75 psi 2″Saddle | F-30200P

Description

Blue-White F-30200P Flowmeter (2 PVC, 20120 GPM)

The Blue-White F-30200P is an industry-standard pitot-tube flowmeter designed for 2 pool and spa plumbing systems. It provides a reliable, real-time reading of water flow (in gallons per minute or liters per minute), helping pool owners and service professionals verify circulation rates, filter turnover, and ensure adequate flow for heaters, chlorinators, and other equipment.

Key Features

• Measures flow in 2 PVC systems20 to 120 GPM on Schedule 40 piping (slightly lower on Schedule 80).
• Clear, one-piece acrylic body with easy-to-read, dual GPM/LPM scale printed on both sides.
• Pitot-tube sensor design for accurate flow measurement in closed-pipe systems.
• Includes stainless-steel mounting clamps and a gasket for straightforward installation on existing plumbing.
• Compact and durable constructionsuitable for outdoor pool equipment pads, indoor equipment rooms, or commercial systems.

Specifications

• Manufacturer: Blue-White Industries
• Model / Part Number: F-30200P
• Pipe Size: 2 (IPS Schedule 40/80 PVC or copper)
• Flow Range: 20120 GPM (Schedule 40), ~18100 GPM (Schedule 80)depends on piping.
• Material: Machined acrylic flow body, neoprene gasket, stainless-steel clamps
• Mounting: Saddle-mount installation (horizontal or vertical orientation, depending on plumbing layout)
• Use Case: Pool and spa circulation systems, heaters, chlorinators, commercial filtration lines, water turnover verification, maintenance diagnostics

Why Use F-30200P

Installing the F-30200P flowmeter gives pool owners and service professionals a simple, visual way to monitor system flow. Whether youre balancing turnover rates, checking for pump or filter problems, verifying flow for heaters or salt systems, or ensuring adequate circulation after maintenancethis flowmeter helps confirm your system is operating as expected. Its durable build and easy install make it a practical, low-maintenance addition to any pool or spa plumbing setup.

Installation & Maintenance Tips

• Mount on a straight section of 2 PVC or copper pipeavoid elbows or fittings near the meter for accurate readings.
• Drill a pitot-tube hole at the 12 oclock position (top of horizontal pipe) or appropriate mounting point for vertical runs; deburr hole edges before inserting the pitot tube.
• Use the provided stainless-steel clamps and gasket for a secure, leak-resistant install; tighten clamps incrementally and evenly.
• Install downstream of filters (after filtration) when possibledebris upstream can affect flow readings or damage the floating sensor.
• Periodically inspect the flowmeter for cracks or chemical wear, especially if exposed to high chlorine or saltwater systems.